Marking a parking lot is very vital because it helps drivers in directing their cars to the intended places they are supposed to park. This is normally done in parking spots for hospitals, businesses, schools and other companies. The parking spaces used by the public are also marked based on the laws that exist within the jurisdiction. There are some factors that should be considered before engaging in this project. When one needs professional parking lot marking Arkansas offers the perfect location to visit.
The first factor that one needs to understand is the kind of laws that apply within their jurisdiction. The laws affect various aspects concerning stripping, such as the dimensions of the parking stalls, color of paint to be used, width of the marking lines, and accessibility of the facility among others. Even though the width of stalls varies based on the jurisdiction, the standards stall should be 9 feet wide and 18 feet long.
Lost usually have aisles to allow drivers to access the stalls easily. The aisles should provide drivers with enough space to maneuver around the lot and to back out of their parking spots. The minimum width of a two-way drive aisle should be 24 feet. On the other hand, a one-way aisle should be 12 feet in width. This is typical for stalls that are placed at an angle. As the size of the angle of the stalls increases towards 90 degrees, the width of the aisle should also increase.
According to federal standards in the US, white is the standard color for the lot markings. Yellow color is used to demarcate areas that are not available for parking. This includes painted islands located at the end of parking rows. The blue color is used for handicapped-accessible spaces. Red color is used to demarcate fire lanes where people are not allowed to park their vehicles.
Normally, stripping is undertaken for two main purposes, namely, aesthetics and safety. When the paint gets applied meticulously and colorfully on the pavement, aesthetics are achieved. Also, safety can be achieved since these markings direct drivers, which reduces instances of accidents. The markings additionally ensure that space is used economically.
One should go for chlorinated rubber paint when they are applying paint on concrete substrates so as to achieve optimal adherence. Water-borne coating is needed for fresh sealer or asphalt surfaces. There is a variety of paints that can be used in re-stripping, but set-quick acrylic waterborne paints are the best option. These paints should be used at degree of 45 F of temperature.
Airless stripping equipment should be used in the application of the paint. The marks should be 13mm wide. It is possible for the surface to absorb the paint thereby causing the applied marks to become thin in the end. A typical paint application will need at least 30 minutes to dry totally and be ready for use.
One is better off applying two thin coats of the paint as opposed to one thick coat. When the marks lose their visibility to 75 percent, it is time to re-strip. The right material should be used to return the marks to their initial level of visibility.
The first factor that one needs to understand is the kind of laws that apply within their jurisdiction. The laws affect various aspects concerning stripping, such as the dimensions of the parking stalls, color of paint to be used, width of the marking lines, and accessibility of the facility among others. Even though the width of stalls varies based on the jurisdiction, the standards stall should be 9 feet wide and 18 feet long.
Lost usually have aisles to allow drivers to access the stalls easily. The aisles should provide drivers with enough space to maneuver around the lot and to back out of their parking spots. The minimum width of a two-way drive aisle should be 24 feet. On the other hand, a one-way aisle should be 12 feet in width. This is typical for stalls that are placed at an angle. As the size of the angle of the stalls increases towards 90 degrees, the width of the aisle should also increase.
According to federal standards in the US, white is the standard color for the lot markings. Yellow color is used to demarcate areas that are not available for parking. This includes painted islands located at the end of parking rows. The blue color is used for handicapped-accessible spaces. Red color is used to demarcate fire lanes where people are not allowed to park their vehicles.
Normally, stripping is undertaken for two main purposes, namely, aesthetics and safety. When the paint gets applied meticulously and colorfully on the pavement, aesthetics are achieved. Also, safety can be achieved since these markings direct drivers, which reduces instances of accidents. The markings additionally ensure that space is used economically.
One should go for chlorinated rubber paint when they are applying paint on concrete substrates so as to achieve optimal adherence. Water-borne coating is needed for fresh sealer or asphalt surfaces. There is a variety of paints that can be used in re-stripping, but set-quick acrylic waterborne paints are the best option. These paints should be used at degree of 45 F of temperature.
Airless stripping equipment should be used in the application of the paint. The marks should be 13mm wide. It is possible for the surface to absorb the paint thereby causing the applied marks to become thin in the end. A typical paint application will need at least 30 minutes to dry totally and be ready for use.
One is better off applying two thin coats of the paint as opposed to one thick coat. When the marks lose their visibility to 75 percent, it is time to re-strip. The right material should be used to return the marks to their initial level of visibility.
About the Author:
You can find a summary of the advantages you get when you use professional parking lot marking Arkansas services at http://www.arrowstriping-nwa.com today.
No comments:
Post a Comment