Mulches are ground covers that are placed around shrubs, trees, and planted beds so that they can provide a layer on top of the bare ground. Several benefits are achieved by mulch. They include providing a layer over ground that is hard to irrigate, mow, or otherwise maintain. In cases of this kind, mulches find use in replacing turf or ground cover. When in need of Mulching York should be visited.
Mulches are only productive when they are used in the right manner in the way that they should be used. Under-using them may lead to no effect being discovered while overusing it may lead to destruction of plants. That is why there are different recommendations for using this material in different areas. For instance, in well-drained soils, the layer should be applied only to a thickness of 2 to 3 inches.
The thickness of 2 to 3 inches should be measured after the mulches have settled properly around the plants. In case the soil has drainage problems, one should use the mulches more conservatively to a thinner thickness. If one is using course materials such as pine nuggets, then the thickness can be increased to about 4 inches. However, this thickness should not be exceeded.
In case the ground already has mulch, it is important to check its depth before applying more. In case the thickness is already between 2 and 3 inches, it is important to keep it at that point and avoid adding more mulch. Mulches that are applied to a very thick layer of beyond 3 inches are referred to as volcano mulching.
There are some negative effects that volcano mulches have on plants. First of all, volcano mulches prevent oxygen from getting to the plant roots. The prevention of oxygen from reaching the roots causes stress to the plant roots which could cause death eventually. Avoiding placing mulches against tree trunks or over balls of roots is another important factor that should be considered.
Covering root balls of trees that are newly planted with mulch of depth beyond one foot usually results into stress. The stress is as a result of water interception by mulch before it reaches roots or utilized by the plant. Also, in order for a tree to develop properly its trunk must be kept mulch-free.
Most mulch sellers normally sell it in the form of cubic yards. Therefore, before setting out to purchase mulches, measuring the size of the area where it should be applied first is important. Measuring of the area should be done in square feet. Once measuring has been done, the depth one desires to lay mulches can be converted into feet.
In case there is mulch that is accidentally applied against the trunk of the plant, it should be pulled back several inches to leave the trunk exposed. When mulch is left to cover the trunk of a tree, it usually causes moisture against the trunk. The moisture leaves the trunk wet most of the time, something that exposes the trunk to the possibility of rotting.
Mulches are only productive when they are used in the right manner in the way that they should be used. Under-using them may lead to no effect being discovered while overusing it may lead to destruction of plants. That is why there are different recommendations for using this material in different areas. For instance, in well-drained soils, the layer should be applied only to a thickness of 2 to 3 inches.
The thickness of 2 to 3 inches should be measured after the mulches have settled properly around the plants. In case the soil has drainage problems, one should use the mulches more conservatively to a thinner thickness. If one is using course materials such as pine nuggets, then the thickness can be increased to about 4 inches. However, this thickness should not be exceeded.
In case the ground already has mulch, it is important to check its depth before applying more. In case the thickness is already between 2 and 3 inches, it is important to keep it at that point and avoid adding more mulch. Mulches that are applied to a very thick layer of beyond 3 inches are referred to as volcano mulching.
There are some negative effects that volcano mulches have on plants. First of all, volcano mulches prevent oxygen from getting to the plant roots. The prevention of oxygen from reaching the roots causes stress to the plant roots which could cause death eventually. Avoiding placing mulches against tree trunks or over balls of roots is another important factor that should be considered.
Covering root balls of trees that are newly planted with mulch of depth beyond one foot usually results into stress. The stress is as a result of water interception by mulch before it reaches roots or utilized by the plant. Also, in order for a tree to develop properly its trunk must be kept mulch-free.
Most mulch sellers normally sell it in the form of cubic yards. Therefore, before setting out to purchase mulches, measuring the size of the area where it should be applied first is important. Measuring of the area should be done in square feet. Once measuring has been done, the depth one desires to lay mulches can be converted into feet.
In case there is mulch that is accidentally applied against the trunk of the plant, it should be pulled back several inches to leave the trunk exposed. When mulch is left to cover the trunk of a tree, it usually causes moisture against the trunk. The moisture leaves the trunk wet most of the time, something that exposes the trunk to the possibility of rotting.
About the Author:
You can find an overview of the benefits you get when you use professional mulching York services at http://www.jmarlandscaping.com/services right now.
No comments:
Post a Comment